 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View LED (Through Hole Type) 94-22/G6C-AQ2S1 Features White package. Dual-chip, wide-angle, low-profile LEDs . Excellent chip to chip consistency Super Intensity High performance Pb-free. The product itself will remain within RoHS compliant version. Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Indicator and backlight for audio and video equipment. Indicator and backlight for battery driven equipment. Display Screen Illumination on Portable Handheld Devices Indicator and backlight in office equipment. General use. Device Selection Guide Chip Emitted Color Material AlGaInP Brilliant Yellow Green Water Clear Resin Color Everlight Electronics Co., Ltd. Device No. : DSE-942-086 http://www.everlight.com prepared date: 01-Apr-2007 Rev. 1 Page: 1 of 7 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 94-22/G6C-AQ2S1 Package Dimensions Note: The tolerances unless mentioned is 0.1mm ;Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-942-086 http://www.everlight.com prepared date: 01-Apr-2007 Rev. 1 Page: 2 of 7 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 94-22/G6C-AQ2S1 Absolute Maximum Ratings @Ta=25 Parameter Reverse Voltage Power Dissipation Peak Forward Current (Duty 1/10 @ 1KHZ) Forward Current Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR Pd IFP IF ESD Topr Tstg Tsol Rating 5 60 60 25 2000 -40 ~ +85 -40~ +90 Unit V mW mA mA V Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Electro-Optical Characteristics @ Ta=25 Parameter Luminous Intensity Viewing Angle Peak Wavelength Symbol IV 21/2 p d VF IR Min. 90 --------569.5 ----3.50 ----- Typ. ----130 575 ----20 --------- Max. 225 --------577.5 ----4.70 10 Unit mcd deg nm nm nm V uA Condition IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm Everlight Electronics Co., Ltd. Device No. : DSE-942-086 http://www.everlight.com prepared date: 01-Apr-2007 Rev. 1 Page: 3 of 7 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 94-22/G6C-AQ2S1 Bin Range Of Dominant Wavelength Bin Code Min. C16 569.5 C17 571.5 C18 573.5 C19 575.5 Bin Range Of Luminous Intensity Bin Code Min. Q2 90 R1 112 R2 140 S1 180 Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm Max. 571.5 573.5 575.5 577.5 Max. 112 140 180 225 Unit Condition nm IF=20mA Unit mcd Condition IF=20mA Everlight Electronics Co., Ltd. Device No. : DSE-942-086 http://www.everlight.com prepared date: 01-Apr-2007 Rev. 1 Page: 4 of 7 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 94-22/G6C-AQ2S1 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. : DSE-942-086 http://www.everlight.com prepared date: 01-Apr-2007 Rev. 1 Page: 5 of 7 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 94-22/G6C-AQ2S1 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. 1 Items Soldering Heat Test Condition Temp. : 2605 Min. 5 sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA / 25 85/85%RH Test Sample Ac/Re Hours/Cycles Size 6 Min. 22 PCS. 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 22 PCS. 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 0/1 4 5 6 7 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-942-086 http://www.everlight.com prepared date: 01-Apr-2007 Rev. 1 Page: 6 of 7 Prepared by:Teresa Lee EVERLIGHT ELECTRONICS CO.,LTD. 94-22/G6C-AQ2S1 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : DSE-942-086 http://www.everlight.com prepared date: 01-Apr-2007 Rev. 1 Page: 7 of 7 Prepared by:Teresa Lee |
Price & Availability of G6C-AQ2S1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |